SUBARU Original Front Windshield Clear View Cover Long

■Material: Polyester (flame-retardant type) ■Size: 3,040 × 3,150 mm ■Color: Silver ■Compatible Models: Legacy B4 / Outback (BN/BS type, BT type) Forester (SJ type, SK type, SL type) Impreza / SUBARU XV / Crosstrek (GJ/GP type, GK/GT type, GU type) Levorg / Leyback (VM type, VN type) WRX (VA type, VB type) ■Components: Clear View Cover Long ×1, Suction cups ×2, Storage bag ×1, Installation/Handling instructions ■Country/Region of Production: Japan ※※Important Notes Regarding the Product※※ ・Before installation, please read the "Handling/Installation Instructions" included with this product. ・The company cannot assume any responsibility for accidents, damage, injuries, etc., resulting from use contrary to the "Important Notes Regarding the Product" or the contents of the included "Handling/Installation Instructions," improper installation, or ignoring deterioration over time. ・This product is not completely waterproof. ・Do not use this product while driving. There is a risk of accident. ・Do not start the engine with this product installed. There is a risk of unexpected accident. ・Do not install in places other than the specified installation location. ・Do not use near open flames or in high-temperature places. There is a risk of product damage, fire, or other accidents. ・When opening the door with this product installed, open it only to the minimum extent necessary to remove the urethane band. ・Do not use in strong winds or heavy snowfall areas. This may cause tearing or other damage. ・Do not install on the front windshield, side door glass, or body painted surfaces if they are dirty with sand or dust. Dirt on the glass can reduce suction, and dirt on the suction cups can scratch the glass or painted surfaces. ・When tucking the band part inside the side door, take extreme care not to pinch fingers or clothing in the door sash or door glass. There is a risk of injury or clothing damage. ・Contact with protruding or sharp objects may cause tearing. ・When removing from the vehicle, do not pull the fabric to remove the suction cups, as this may tear the fabric. Remove by holding the suction cups. ・This product's surface has a silver coating with flame-retardant, light-resistant, and water-repellent properties. Please note that the silver coating may transfer to the vehicle. ・To wipe off the above or dirt, use a cloth dampened with diluted neutral detergent or water. Do not use organic solvents such as benzene or thinner. ・If suction cups become deformed and difficult to attach, they can be restored by soaking only the suction cups in hot water (approx. 70°C) for 5-6 minutes. ・When not in use, fold neatly and store. ・During installation, if the urethane pad gets caught between the door sash and body, water may enter the vehicle during rain. Ensure the urethane pad is properly placed inside the vehicle during installation. ・While durability is considered, please note that fading may occur depending on the usage environment. ・Colors may appear different on displays compared to the actual product.