SUBARU Original Front Windshield Clear View Cover

■Material: Polyester (Taffeta Silver Coat Flame Retardant) ■Size: Width 1,960mm × Height 1,120mm ■Compatible Models: Legacy B4 / Outback (BN/BS type, BT type) Forester (SJ type, SK type, SL type) Impreza / SUBARU XV / Crosstrek (GJ/GP type, GK/GT type, GU type) Levorg / Legacy (VM type, VN type) WRX (VA type, VB type) Exiga (YA type) ■Components: Clear View Cover main unit, suction cups ×6, handling/installation instructions ■Country of Production: Japan ※※Important Notes Regarding the Product※※ ・Before installation, please read the included "Handling and Installation Instructions." ・We cannot assume any responsibility for accidents, damage, injuries, etc., resulting from use contrary to the "Important Notes Regarding the Product," improper installation, ignoring aging degradation, or use not in accordance with the instructions included with this product. ・This product is not completely waterproof. ・Do not use this product while the vehicle is in motion. There is a risk of accident. ・Do not start the engine with this product installed. There is a risk of unexpected accident. ・Do not install in locations other than the specified installation areas. ・Do not use near open flames or in high-temperature locations. There is a risk of product damage, fire, or other accidents. ・Do not open the door with the suction cups on the side door attached to the door glass or door panel. This may cause tearing or other damage. ・Do not use in strong winds or in heavy snowfall areas. This may cause tearing or other damage. ・Do not install on the windshield, side door glass, or body paint if sand or dust is present. Dirt on the glass can reduce suction, and dirt on the suction cups can scratch the glass or body paint. ・When tucking the strap portion inside the side door, take extreme care not to pinch fingers or clothing in the door sash or door glass. There is a risk of injury or clothing damage. ・Contact with protruding or sharp objects may cause tearing. ・When removing from the vehicle, do not pull on the fabric to remove the suction cups, as this may tear the fabric. Remove by holding the suction cups. ・The surface of this product has a silver coating with flame-retardant, light-resistant, and water-repellent properties. Please note that the silver coating may transfer to the vehicle. ・To wipe off the above or dirt, use a cloth dampened with diluted neutral detergent or water. Do not use organic solvents such as benzene or thinner. ・If suction cups become deformed and difficult to attach, they can be restored by soaking only the suction cups in hot water (approx. 70°C) for 5-6 minutes. ・When not in use, fold neatly and store. ・If the urethane pad gets caught between the door sash and the body during installation, water may enter the vehicle during rain. Ensure the urethane pad is properly tucked inside the vehicle during installation. ・While durability is considered, fading may occur depending on the usage environment. Please be aware of this. ・The color tone in photos on a display may appear different from the actual product color.