To Order
Bottle-Type Tissue Case (Short)
Cylindrical tissue case for cup holders (Short)
SKU: FHPJ22000300
To Order
¥2,640
(3 168 ¥)
This item is shipped from Japan on order. Delivery takes 2 to 4 weeks. Shipping cost is calculated separately.
The price shown is for the product only. Our manager will inform you of the shipping cost after placing your order.
Specifications
■Material: Aluminum
■Size: Diameter 68mm × Height 158mm
■Color: Black
■Country/Region of manufacture: China
Product Notes
・As this is a general-purpose product, please check the installation location dimensions (height × width × depth) and the product dimensions beforehand.
・Drivers should not use this product while driving.
・Installation, removal, and operation of this product must be performed only when the vehicle is parked in a safe location.
・For safety, use in a location that does not interfere with driving operations, visibility, or airbag deployment.
・Use in a location where, even if it falls, it will not hinder driving operations.
・Take sufficient care to keep flames such as cigarette lighters away.
・Do not use for purposes other than its intended use.
・The product may fall due to vehicle vibration or movement during sudden starts, acceleration, braking, sharp steering, or when driving on curves, rough roads, bumps, etc.
・Due to product characteristics, if left inside a car under direct sunlight, it may become hot. Be careful of burns, etc.
・Depending on the vehicle, the installed area may discolor slightly, or rubbing marks or installation marks may remain.
・Due to material characteristics, if the painted or printed surfaces come into contact with other surfaces, color transfer, rubbing marks, or installation marks may occur.
・Discoloration, deformation, or deterioration may occur depending on usage conditions, aging, exposure to direct sunlight, etc.
・Please be aware that the color tone in the photo on a computer display may appear different from the actual product color.
About Tissue Paper
・When the included tissue paper runs out, it can be refilled with commercially available tissue paper.
・Compatible with tissue paper widths from 200mm to 216mm.
・Refill with approximately 30-40 sheets of commercially available tissue paper (guideline: about 15mm thickness) by cutting the long side in half with scissors, etc., to fit the holder size.
・If there is too much tissue paper, it may be difficult to pull out or may tear during use.
・Pulling out the first sheet from the inside of the refill tissue paper makes it easier to pull the tissue paper from the outlet.
・If rolled too tightly, the tissue paper may be difficult to pull out.
Care Instructions
・Wipe with a damp, well-wrung cloth and ensure it is completely dry before use.
・If the product gets wet, do not leave it as is; remove the lid and let it dry.
・Do not use benzene, thinner, alcohol, chlorine-based solvents, or dry cleaning.
・Do not use washing machines, spin dryers, dryers, deodorizers, etc.
Category:
Mugs & Bottles